- Customer defined characteristics
- It is used for blasting / peening
- Application: clean light / medium / heavy / foundry
- Control: PLC or SCADA
- Unlimited options
- Long delivery time
- ir wheel with all options
- Price upon request
- High manufacturing quality
Shot blasting machine for flat steel type PL is used for shot blasting of flat steels of different dimensions and length. It is suitable for medium capacity. Blasting machine is equipped with a horizontal manipulator for automated handling of flat steel to shot blasting machine and then on conoid rollers through shot blasting machine. Flat steel is loaded to a loading device. Vertical conveyor is adding flat steel on roller conveyor automatically, pressing wheel is pressing flat steel on the rollers.
After shot blasting they are automatically unloaded from roller conveyor. Width of guiding beam on roller conveyor can be changed according to a width of flat steels. In shot blasting machine are two change-over flaps from wear-resistant steel, which direct jet to working pieces, in way that the throwing wheel energy is maximal used.
Entrance switch automatically turns on-off shot blasting, so that throwing wheels shotblast only on working piece, this decrease wearing of the machine and use of energy to minimum.
Working parts are loaded with lifting device (lift, fork lift) or through conveyor to vibrational conveyor located in the entrance of the blasting machine. Working parts are transported to the shot blasting machine, where they fall in oscillating drum.
All Gostol TST shot blasting machines have installed ir throwing wheels. If you would like to increase the efficiency of shot blasting machine, it can be upgraded with the sm@rt cloud platform, where all the information about shot blasting machine is gathered in one place.
Gostol TST installed many shot blasting machines all over the world. If you would like to know where our shot blasting machines are installed check our references.
|Min. flat steel dimensions (WxH) (mm)||12 x 8|
|Max. flat steel dimensions (WxH) (mm)||20 x 30|
|Orientation of flat steel Vertical or horizontal||Orientation of flat steel Vertical or horizontal|
|Length of flat steel (mm)||4000 – 7500|
|Transport speed of flat steel (at max. Section) (m/min)||6|
|Required quality of cleaned surface (Sa)||2 ½|
|Working height (mm)||1000 ± 50|
|Max. working width up to||Up to 40 mm|
|No. of throwing wheels||2|
|Type of throwing wheels||300 D|
|Wheel motor power (kW)||2 x 7.5 kW|
|Abrasive speed (m/s)||55|
|Capacity of throwing wheel (kg/min)||120|
|Total installed power of the machine (kW)||16.5|
|Filter motor power||4|
|Total installed power (kW)||20.5|
|Air consumption (m3/h)||3 – 4|
|Working pressure of compressed air (bar)||4 – 6|
|Total filtering surface||Approx. 40|
|No. of filter cartridges||4|